Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Print Head Cable Replacement Printer Component, Software Item, LCD Display, Printer Button Page 103.
Print Head Cable Replacement
Incorrect replacement of the Print Head Cables can cause serious damage to the Driver Board.
1. Mark each Cable with the appropriate Connector number, as you disconnect the cables from the
Print Head...
Note: Marking the Cables is to ensure that the New Cables are connected properly.
Note: Failure to connect the New Cables properly results in Driver Board damage.
2. Mark each Cable with the appropriate Connector number as you disconnect each Cable from the
CN12
CN11
CN10 CN9 CN8 CN7
Write the connector number on
the cable.
CN12
CN11
CN10
CN9
CN8
CN7
CN24
CN22
CN19
CN23
CN20
Print Head
Board
CN21