Service manual

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635 Revision C
DISASSEMBLY AND ASSEMBLY Removal of Exterior Parts 77
Confidential
 When installing the Middle Housing, pull out the Head FFC
from the point A and other cables from the point B. Be careful
not to damage the cables by letting them get caught.
Figure 4-33. Installing the Middle Housing (1)
 When installing the Middle Housing, route the Head FFC
between the Front Frame and the Middle Housing.
Figure 4-34. Installing the Middle Housing (2)
Point A
Point B
Head FFC
Front Frame
 When installing the Middle Housing, align the hooks (x2) of the
Front Frame Ground Plate with the hole of the Middle
Housing, and then slide it in the direction of the arrow to secure
the hooks. Make sure that the Front Frame Ground Plate
surely comes in contact with the Front Frame.
Figure 4-35. Installing the Middle Housing (3)
 Tighten the screws in the order given in Fig. 4-32.
 When installing the Card Slot Cover, align the positioning holes
of the Card Slot Cover with the dowels of the Middle Housing.
(See Figure 4-31.)
 For routing the cables, see Figure 4-39(p.79).
Align hooks (x2) with hole of
Middle Housing, slide it in the
direction of the arrow to secure.
In contact with the Front Frame
Front Frame Ground Plate
Hook
Front Frame