Service manual

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635 Revision C
DISASSEMBLY AND ASSEMBLY Removal of Exterior Parts 72
Confidential
4.2.6 Panel Unit
 Parts/Components need to be removed in advance
Upper Housing
 Removal procedure
1. Disconnect the Panel FFC (CN24) from the connector on the Main Board and peel
off the Panel FFC from the M/B Cover.
Figure 4-22. Removing the Panel Unit (1)
2. Remove the screws (x2) that secure the Panel Gear.
3. Remove the screws (x1 each) that secure the Panel Hinges (x2), and remove the
Panel Unit from the M/B Cover.
Figure 4-23. Removing the Panel Unit (2)
C H E C K
P O I N T
The disassembly/reassembly procedures for Epson Stylus Photo
PX660/PX660 Premium/Artisan 635 differ from those for Epson
Stylus Photo PX650/TX650/TX659. See "8.2.2.2 Panel Unit"
(p.148) for the procedures.
C A U T I O N
Be careful not to disconnect the Panel FFC from the connector on
the Panel Board.
Double-sided tape
Panel FFC
CN 24
Panel Unit
Main Board
Be careful not to disconnect.
C A U T IO N
M/B Cover
C.B.P. 3x10 (6±1 Kgfcm)
Panel Gear
M/B Cover
Positioning hole and dowel
Panel Unit
Panel Hinge
M/B Cover
Left
Panel Hinge
M/B Cover
Right
Front upper