Service manual

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635 Revision C

DISASSEMBLY AND ASSEMBLY Removal of Exterior Parts 66

Confidential

4.2.4 Upper Housing/Scanner Cable Cover

 Parts/Components need to be removed in advance: None

 Removal procedure

1. Open the Scanner Unit.

2. Release the hook of the Scanner Cable Cover and remove it in the direction of the

arrow.

Figure 4-10. Removing the Scanner Cable Cover

3. Close the Scanner Unit and remove the screws (x2) of the hinge part.

Figure 4-11. Removing the Upper Housing (1)

C H E C K

P O I N T

The Scanner Unit cannot be opened enough to use a general

screwdriver for removing the screws that secure the Upper

Housing; therefore, this section describes removing the Scanner

Unit before removing the Upper Housing.

The screws that secure the Upper Housing can be removed with a

L-shaped screwdriver, a stubby driver or a similar tool without

removing the Scanner Unit, in that case, you can skip the step 3 to

5 (p.67).

Figure 4-9. L-shaped Screwdriver and Stubby Driver

L-shaped screwdriver

Stubby driver

Scanner Cable Cover

Scanner Unit

Left inside

Rib

Hook

Middle Housing

C.B.P. 3x10 (6±1 Kgfcm)

Rear upper