Service manual

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635 Revision C
PRODUCT DESCRIPTION Specifications of Each Function 27
Confidential
1.7.3.2 Backup Errors
If a backup operation is cancelled voluntarily or due to an error, a “Backup canceled”
message appears with a hexadecimal 8-digit error code on the LCD. The following
table lists the leftmost two-digit error codes that are controlled by the printer firmware.
For explanations on other backup errors, see "3.2.1 Error List (p.43)".
Table 1-29. Backup Error FW Control Code List
Code
Meaning
Code
Meaning
0x00 No error 0xC0 No files to be backed up
0x10 Album function error 0xE7 Parameter error
0x20 Backup function error 0xE8 File open error
0xA0 Other ATAPI/SCSI command error 0xE9 Internal buffer overflow
0xA1 ModeSense command error 0xEA CD/DVD format error
0xA2 ModeSelect command error 0xEB Not used
0xA3 Get Disc Information command error 0xEC Insufficient memory
0xA4
Get Track Information
command error
0xED
Some data exist in the destination
directory
0xA5 Synchronize Cache command error 0xEE Not used
0xA6 CloseSession command error 0xEF Write-protect error
0xA7 Read command error 0xF0 Read/write error
0xA8 Write command error 0xF1 Invalid file open mode
0xA9 Set Speed command error 0xF2 Seek error
0xAA Eject command error 0xF3 Overflow of root directory
0xAB Drive lock command error 0xF4 Overflow of file descriptor
0xAC GetConfigration command error 0xF5 Invalid path name
0xAD Verify command error 0xF6 No file exist
0xAE Device error 0xF7 Medium was exchanged
0xB8 Short file name convert error 0xF8 Unformatted medium
0xB9 Unsupported device 0xF9 Device is not ready
0xBA No medium 0xFA Invalid device handle
0xBB Not writable medium 0xFB Invalid file descriptor
0xBC Unsupported medium 0xFC Not used
0xBD Hierarchical directory error 0xFD Backup initialization failed
0xBE Path length is too long 0xFE Acquiring memory pool failed
0xBF File name is too long 0xFF System error