Service manual

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635 Revision C
DISASSEMBLY AND ASSEMBLY Disassembling the Printer Mechanism 101
Confidential
4. Remove the Paper Eject Frame Assy from the printer.
Figure 4-95. Removing the Paper Eject Frame Assy (2)
 Align the shaft holders (left and right) on the bottom of the
Eject Frame with the EJ Roller Shaft.
Figure 4-96. Installing the Paper Eject Frame Assy (1)
Paper Eject Frame Assy
Paper Eject Frame Assy
Shaft holder
Shaft holderEJ Roller Shaft
 When installing the EJ Frame Assy, make sure that the Left/
Right EJ Frame Springs are attached as shown in Fig. 4-97.
Carefully handle the EJ Frame Assy as the springs come off
easily.
Figure 4-97. Installing the Paper Eject Frame Assy (2)
 When installing the Front Frame, screw it after securing the
foot of the two EJ Frame Springs to the slits as shown in the
figure. Carefully handle the EJ Frame as the springs come off
easily.
Figure 4-98. Installing the Paper Eject Frame Assy (3)
Left side
Left EJ Frame Spring
Longer side
Right side
Right EJ Frame Spring
Shorter side
Right side
Right EJ Frame Spring
Left side
Left EJ Frame Spring