Service manual

EPSON Stylus Photo 870/1270 Revision B
Disassembly And Assembly Disassembly Procedures 95
8. Remove the tension spring (0.618) attached to the LEVER, DE, LOCK
and DE Unit.
Figure 4-25. TENSION SPRING, 0.618 Removal
9. Release the hook in the DE Unit (BRACKET, MOTOR, ASF) securing
LEVER, DE, LOCK. Then push the lever out to the right to release it
from the installation hole in the DE Unit and remove it.
Figure 4-26. LEVER, DE, LOCK Removal
LEVER, DE, LOCK
TENSION SPRING, 0.618
CAUTION
When removing LEVER, DE, LOCK, be careful not to break
the hook in the DE Unit.
Locking position
LEVER, DE, LOCK
LEVER, DE, LOCK