Service manual

EPSON Stylus Photo 870/1270 Revision B
Disassembly And Assembly Overview 75
4.1.2 Tools
Table 4-1 lists the tools recommended for disassembling, assembling, or
adjusting the printer. Use only tools that meet these specifications.
CAUTION
Risque d’explosion si la pile est remplacée incorrectment.
Ne remplacer que par une pile du même type ou d’un type
équivalent recommandé par le fabricant. Eliminer les piles
déchargées selon les lois et les règles de sécurité en
vigueur.
CAUTION
!
Never remove the ink cartridge from the carriage unless
this manual specifies to do so.
!
When transporting the printer after installing the ink
cartridge, be sure to pack the printer for transportation
without removing the ink cartridge.
!
Use only recommended tools for disassembling,
assembling or adjusting the printer.
!
Apply lubricants and adhesives as specified. (See
Chapter 6 for details.)
!
Make the specified adjustments when you disassemble
the printer.
(See Chapter 4 for details.)
!
When assembling, if an ink cartridge is removed and
needs to be installed again, be sure to install a new ink
cartridge because of the following reasons;
1.Once the ink cartridge mounted on the printer is
removed, air comes into and creates bubbles in the
cartridge. These bubbles clog ink path and cause
printing malfunction.
2.If an ink cartridge in use is removed and is reinstalled,
ink quantity will not be detected correctly since the
counter to check ink consumption is cleared.
!
Because of the reasons above, make sure to return the
printer to the user with new ink cartridges installed.
Table 4-1. Tool List
Tools
Commercially
Available
Code
(+) Driver No.2 O.K. B743800200
(+) Driver No.1 O.K. B743800400
Tweezers O.K. B741000100
Hexagon Box Driver
(Paired side: 5.5mm)
O.K. B741700100
Scale PF unit Assembling
tool
EPSON exclusive 1050767
Mounting Plate Scale
Attachment tool
EPSON exclusive 1051765