User Setup Information

You see a dialog box similar to the following:
The print job listed under Printing is currently being printed.
Jobs listed under Waiting are queued to begin when the
current job is completed. To cancel a print job, click the name of
the job and then click Cancel Printing.
Calibrating the Printer with Bi-D Calibration
Your printer has been calibrated at the factory so that vertical
lines in your text and graphics are properly aligned. If you
notice misaligned images in printouts, however, you can
calibrate the printer with the Bi-D Calibration Utility. You may
need to do this after moving the printer to a new location, for
example.
Before calibrating, verify that your printer needs it by printing
a demonstration page. Turn off your printer. Then hold down
the Alt button as you turn the printer back on. Hold down Alt
until the printer feeds a page. Examine the demonstration
printout; if vertical lines are misaligned, calibrate the printer.
Do not calibrate your printer too often.
3-2
Using the Printer Driver Utilities