User Setup Information

Chapter 3
Using the Printer Driver Utilities
This chapter explains managing print jobs that you send to the
printer with the Epson Monitor2 Utility. It also tells you how to
calibrate the printer using the Bi-D Calibration Utility if vertical
lines in your printed output become misaligned.
If you selected the Serial Driver Package option when you
installed the driver, both of these utilities were copied to your
hard disk. If you did not select the Serial Driver Package
option, you can install these utilities from the Macintosh
printer driver diskette using the Installer program. See
page 2-1 for instructions.
Managing Print Jobs
You can use the Epson Monitor2 Utility to check on the status
of print jobs that are queued for printing. The utility also
allows you to cancel any print job in the queue.
Follow these steps to run it:
1. Before using Epson Monitor2, you must first select
background printing using the Chooser (if you have not
done so already). See “Using the Chooser to Select the
Printer” in Chapter 2 for instructions.
2. Start a print job.
3. Click on the icon in the upper right corner of the display and
pull down the menu that appears. (The shape of the icon
depends on the software you are using.)
4. Select Epson Monitor2 from the menu.
Using the Printer Driver Utilities
3-1