User Setup Information

Caution:

Once you install the ink cartridges, do not open the

clamps or remove the cartridges except to replace them

with new ones. Once you remove a cartridge, do not reuse

it. Reusing a cartridge that has been removed may damage

the print head.

9. Press the

Alt

button again to return the print head to its

home position. (Even if you do not press

Alt

, the print head

moves back to its home position about 30 seconds after you

close the clamps.)

After you install the ink cartridges, the printer charges the

ink delivery system. This takes about two minutes. During

this time, the

Pause

light flashes. When the printer is

finished charging, the

Pause

light stays on without

flashing.

Caution:

Never turn off the printer when the

Pause

light flashes.

10. Close the printer cover.

In order to maintain optimum print quality, the printer

periodically performs a cleaning operation. You may notice the

cleaning cycle being performed when the printer has been on

for awhile without being used or when you turn it on after it

has been off for awhile.

You may need to manually activate a cleaning cycle if you

notice a decline in print quality; see Chapter 3 of the

Reference Guide

Caution:

When you need to replace ink cartridges, be sure to use only

genuine EPSON ink cartridges and do not refill them. Other

products may cause damage not covered by EPSON’s

warranty.

Installing the Printer

1-9