User Setup Information

2. Make sure the printer is turned off by checking the position
of the
POWER
switch, as shown below.
3. Plug the power cord into a properly grounded electrical
outlet.
4. Turn on the printer by pressing the
POWER
switch.
Installing the Ink Cartridges
Follow the steps in this section to install your printer’s ink
cartridges.
w
Warning:
The ink cartridges are self-contained units. Under ordinary
use, ink will not leak from a cartridge. If ink gets on your
hands, wash them thoroughly with soap and water. If ink gets
into your eyes, flush them immediately with water.
c
Caution:
Do not open the ink cartridge packages until just before you
install them or they may become too dry.
Installing the Printer
1-5