User Setup Information

Portrait or Landscape
Select either the Portrait or Landscape button to specify the
orientation of the image on the page. In portrait orientation, the
top of the page is parallel with the short edge of the paper. In
landscape orientation, the top of the page is parallel with the
long edge of the paper.
Normally you should select the page orientation in your
software application, not with the driver.
Paper source
For your printer, the paper source is always Auto Sheet
Feeder.
Copies
Allows you to specify the number of copies, whether to collate
them (print them in sets), or whether you want to print the
pages in reverse order (from last page to first).
Normally you should select these three settings from the Print
dialog box in your software program, not with the driver. Do not
choose multiple copies in both the Print dialog box and the driver.
Note:
The Copies options may require additional system memory. If you
see an error message or are unable to print using these options, try
closing any unnecessary applications, reducing the size of your print
job, turning off the Copies options, or increasing system memory.
Printing Mode/Options Settings
The Printing Mode/Options settings let you define the
resolution, media type, and printing options for your
document. The following table shows how these settings are
related to each other and which options are available in the
different modes.
2-16
Installing and Using the Printer Driver