Operation Manual

R4C623Setup Guide
Rev_C
A5 size SETUP.FM
10/18/00 Pass 0
L
Proof Sign-off:
Ichihara, CRE Moriyama_______
N.Nomoto _______
_______
The print head moves left to the ink
cartridge installation position. The
2
power light flashes and the
*
and
)
ink out lights come on.
?
Caution:
Do not move the print head by hand;
doing so may damage the printer.
3. Lift up the ink cartridge clamps.
Note:
Do not remove the small sponges that are attached to the ink cartridge clamps.
4. Open the ink cartridge packages
and remove only the yellow tape
seals from each cartridge.
?
Caution:
❏
You must remove the yellow tape seals from the cartridges before
installing them; otherwise, a fatal error will occur and the
cartridges will become unusable.
❏
Do not remove the blue portion of the tape seals from the cartridges;
otherwise, the cartridges may become clogged and unable to print.
❏
Do not remove the tape seals from the bottom of the cartridges;
otherwise, ink will leak.
5. Place the black ink cartridge gently into
its holder with the labels facing up. Do
not press down on the cartridges.
Note:
Install both ink cartridges. If either of the
cartridges is not installed, the printer will not
work.