Specifications

Introduction Page 10
Windows System Requirements
To use your printer and its software with a PC, your system should have:
◗ An IBM
®
-
compatible PC with at least a 386/25 MHz (for
Windows 3.1x), 486/25 MHz (for Windows 95 or Windows NT
®
4.0),
or 486/66 MHz (for Windows 98) processor
◗ DOS, Windows
3.1x, Windows 95, Windows 98, or Windows NT 4.0
◗ At least 16MB of RAM (32MB for Windows 3.1, 95, or 98 or 64MB for
Windows NT 4.0 recommended)
◗ At least 50MB of free hard disk space for storing images (100MB
recommended)
◗ VGA, Super VGA, or better display adapter and monitor
◗ Double-speed (2X) CD-ROM drive (quad-speed [4X] or faster
recommended) for installing the printer software
◗ For parallel connection, a high-speed, bidirectional, IEEE-1284
compliant parallel cable (6 to 10 feet long); the cable must have a
D-SUB, 25-pin, male connector for your computer and a 36-pin,
Centronics
®
compatible connector for the printer.
For USB connection to a computer running Windows 98 with a
Windows 98 compliant USB port, a shielded USB “AB” interface cable,
from Series A (computer) to Series B (printer), up to 6.5 feet
(2.0 meters) long.
Using an improperly
shielded USB cable—
especially a cable
more than 6.5 feet
(2.0 meters) long—
may cause the printer
to malfunction.
color900.book Page 10 Wednesday, January 6, 1999 12:39 PM