Parts User Manual

4-7
Printing with EPSON Stylus RIP for Windows
Selecting Device Options/Printer Features
The Windows 95/98 Device Options tab and the
Windows NT Printer Features section let you set up your
document for printing at different resolutions, on different
media types, and with different PostScript effects. You can
change the following printer options:
1. Set the
Media(Quality)
option to correspond to the paper
youre printing on and the resolution (print quality) you
want to use. See your printer users guide for more
information about Media Type and Print Quality settings.
2. Set the
Ink
option to
CMYK
(color) or
Grayscale,
depending on whether you want color or black and white
output.
3. If you have an EPSON Stylus COLOR 1520 or 3000
printer, or an EPSON Stylus Photo 1200 printer, choose
one of the following
Paper Options
:
◗ Print on roll paper
Choose this setting when youre printing on roll paper;
otherwise, the printer will eject the entire roll of paper.
◗ Print on single sheets
Choose this setting when youre printing on single
sheets of paper; otherwise, the top and bottom edges of
your image may be clipped.
4. If you are printing with CMYK color data and you want
your printers output to match the SWOP, Euro, or DIC
standards of offset printing color separations, choose the
appropriate standard as the
Press Simulation
setting. You
have the following choices:
◗ SWOP
(Specifications for Web Offset Publications,
the U.S. standard for coated paper)
Nflight.bk Page 7 Thursday, April 22, 1999 5:02 PM