Parts User Manual

4-1

Once youve installed the EPSON Stylus RIP software on your

computer(s), youre ready to print in PostScript. To print with

the EPSON Stylus RIP, you need to start the RIP, set printing

options, print from your application, and let the RIP process

your print job and send it to your printer. You can then use the

EPSON Stylus RIP window to monitor your print jobs, manage

the print queue, or run a batch of print jobs at the same time.

Heres what this chapter covers:

◗

Printing from a Windows application

◗

Setting printer and output options

◗

Managing print jobs

◗

Printing over a network

◗

Configuring the EPSON Stylus RIP application

Printing from an Application

When you want to print PostScript documents, you must first

start the EPSON Stylus RIP software. Then you print via the

PostScript driver, which automatically stores your print job as a

file on your hard disk. The RIP then automatically processes

the print job and sends it to your printer.

Printing with

EPSON Stylus

RIP for Windows

Nflight.bk Page 1 Thursday, April 22, 1999 5:02 PM