Parts User Manual

2-9
Printing with EPSON Stylus RIP for Macintosh
Sending the Print Job
To print a document from an application, follow these steps:
1. Open the document you want to print in your application.
2. Select
Page Setup
from the File menu. The Adobe Page
Setup dialog box appears. Set the print options for your
document and click
OK
.
3. Once you have set up the page, select
Print
from the File
menu. The following dialog box appears:
4. Select the number of copies, page range, and paper source
you want. Make sure the Destination option is set to
Printer
, not
File
. Then click
Print
.
If you want to use the drag and drop printing method
described on page 2-15, select
File
instead, and make sure
you print to a PS, not EPS, file.
To set options for this print job, choose a print job option
category from the
General
pop-up menu. See page 2-10.
Click here
to select
different
categories
of print job
options
Click here
to save
the current
settings as
the default
settings
Click here to print
your document with
the current settings
Nflight.bk Page 9 Thursday, April 22, 1999 5:02 PM