Installation Instructions

R4C626Setup Guide
Rev_C
A5 size setup NO ARROWS.fm
9/8/00 Pass 0
R
Proof Sign-off:
Otsuka, CRE Moriyama_______
N.Nomoto _______
_______
Checking the print head nozzles
Make sure that the
printer is turned off.
Hold down the
5
load/
eject button (
➀
in the
illustration) and press
the
2
power button (
➁
in the illustration) to
turn on the printer. Then
release both buttons.
Here are sample
printouts.
If the nozzle check page does not print satisfactorily (for example, if any
segment of the printed lines is missing), then you should clean the print
head as described below. If the printout is satisfactory, you are ready to
print your first page. See “Printing Your First Page” for instructions.
Cleaning the print head
Follow the steps below to clean the print head.
1. Make sure that the
2
power light is on and that both the
*
black and
)
color ink out lights are off.
2. Hold down the
* )
cleaning button for
three seconds.
The printer starts
cleaning the print
head and the
2
power light
begins flashing.
Print head cleaning
takes about thirty
seconds to complete.
Segments are missing
Good sample
Print head needs to be cleaned