User Setup Information

Connecting to a Macintosh
1. Turn off the printer and your Macintosh.
2. Connect one end of the cable to the serial connector on
the back of the printer.
3. Connect the other end of the cable to either the modem
port or the printer port on your Macintosh.
Now you need to install the printer software so you can
control printing from your computer. You must install the
software for the printer to work correctly. See the instructions
included with your EPSON printer software CD-ROM or
diskettes.
Install the Printer Software
Note:
If you want to use your
printer on a network, you
need to follow special
setup procedures. See
your
User’s Guide for
more information.
Untitled-1 5/22/97, 10:20 AM7