User Setup Information

Attach the Paper Support
Caution:
Do not plug the printer
into an outlet
controlled by a wall
switch or timer, or on
the same circuit as a
large appliance. This
may disrupt the power,
which can erase
memory and damage
the power supply.
Plug In the Printer
Insert the paper support in the top slot on the back of the
printer.
First make sure the power is off. Check the power button;
it’s off when its surface is raised above the printer surface.
Plug the power cord into a properly grounded outlet.
power
Untitled-1 5/22/97, 10:20 AM2