Service manual

EPSON Stylus COLOR 480 Revision B

Disassembly and Assembly Disassembly 98

n When you replace the ASF frame or Hopper with the new one,

make sure to lubricate the specific amount of G26 into the groove

on ASF frame. Refer to Figure 6-7 & Figure6-9 in the Chapter 6.

n Fasten the ASF unit C.B.S. TITE (P4) 3x6,F/Zn screw (left screw

in the following figure), Plain washer 3.2x1x7,F/Zn & C.B.S

3x6,F/Zn screw (right screw in the following figure) in the order

of following figure.

Figure 4-61. ASF fixing screws fastening order

Tightening torque for screw

• C.B.S. 3x6 F/Zn screw for ASF : 9+/-1 kgf.cm

(right screw in above figure)

• C.B.S. TITE(P4) 3x6, F/Zn screw for ASF : 9+/-1kgf.cm

(left screw in above figure)