Service manual

EPSON Stylus COLOR 480 Revision B
Disassembly and Assembly Disassembly 78
CHECK
POINT
When replacing or removing the PS board, be sure to use the
following suitable screw to secure the PS board.
Figure 4-15. PS board fixing screws.
n
Install a new cartridge before sending back the printer to the
user, since the ink cartridge once taken out can not be used
again.
n Installation of I/C must be carried out by I/C replacement
sequence. Otherwise, ink may not eject properly.
Refer to the Page101.
C.B.S-TITE R, 3x6, F/UC