Service manual

EPSON Stylus COLOR 480 Revision B
Disassembly and Assembly Disassembly 72
4.2.1 Housing removal
1. Open the printer cover and remove 1 screw (C.B.P-TITE R 3x6 R/Uc screw) at the
printer front side.
Figure 4-2. Removing 1screw for Housing
2. Remove 1 screw (C.BS. 3x6 F/Zn screw) at the back of the printer and remove the
Housing.
Figure 4-3. Removing 1scew for Housing
C.B.T-TITE R 3X6 R/Uc screw
C.B.S 3X6 F/Zn screw
n Tightening Torque for screw
• C.B.P-TITE R3x6 R/Uc screw for housing front side: 6 +/- 1kgf.cm
• C.B.S 3x6 F/Zn screw for housing back side : 6+/- 1kgf.cm