Service manual

EPSON Stylus COLOR 480 Revision B
Disassembly and Assembly Overview 69
4.1.2 Tools
Use only specified tools to avoid damaging the printer.
CAUTION
Risque d’explosion si la pile est remplacée incorrectment. Ne
remplacer que par une pile du même type ou d’un type équivalent
recommandé par le fabricant. Eliminer les piles déchargées selon
les lois et les règles de sécurité en vigueur.
CAUTION
n Never remove the ink cartridge from the carriage unless this
manual specifies to do so.
n When transporting the printer after installing the ink cartridge,
be sure to pack the printer for transportation without removing
the ink cartridge.
n Use only recommended tools for disassembling, assembling or
adjusting the printer.
n Apply lubricants and adhesives as specified. (See Chapter 6 for
details.)
n Make the specified adjustments when you disassemble the printer.
(See Chapter 5 for details.)
n When assembling, if an ink cartridge is removed and needs to be
installed again, be sure to install a new ink cartridge because of
the following reasons;
1. Once the ink cartridge mounted on the printer is removed, air comes in
and creates bubbles in the cartridge. These bubbles clog ink path and
cause printing malfunction.
2. If an ink cartridge in use is removed and is reinstalled, ink quantity
will not be detected correctly since the counter to check ink
consumption is cleared.
n Because of the reasons above, make sure to return the printer to
the user with a new ink cartridge installed.
Name Supplier Parts No.
Phillips Screw Driver (No.1) EPSON B743800100
Phillips Screw Driver (No.2) EPSON B743800200
Nipper EPSON B740500100
Tweezers EPSON B741000100