Service manual

EPSON Stylus COLOR 480 Revision B
Troubleshooting Overview 53
Table 3-3. Error Indication
Condition Status Monitor 3 Indication
Generic
Remedy
• No Paper
• Paper is not
loaded correctly
Figure 3-2. Paper is not loaded correctly
1) Reload the
paper, then
click the
“Continue”
button.
2) If you want
cancel the print
job, click the
“Cancel”
button.
• Paper Jam
Figure 3-3. Paper Jam
1) Click the
“Eject” button
to eject any
jammed paper.
2) If the paper
is still jammed
inside the
printer, click
the “Stop”
button to
cancel the print
job. Then,
open the
printer cover
and remove the
jammed paper.
Table 3-4. Error indication
Condition Status Monitor 3 Indication
Generic
Remedy
• Ink Out
Figure 3-4. Ink out
1) Click the
“How to”
button and
replace the I/C
by following
the procedure.
• Ink Low
Figure 3-5. Ink low
NOTE: If this error is indicated on the
monitor, you can continue the
printing until the I/C becomes ink
out condition. However, the head
cleaning operation can not be
done so that the remaining ink is
low condition. Refer to Figure 3-6
on the next page.
1) Click the
“How to”
button and
replace the I/C
by following
the procedure.