Service manual

EPSON Stylus COLOR 480 Revision B
Product Description Basic Specification 15
1.2.3 Printable Area
CUT SHEET
Refer to the following table. As for the each margin area, refer to the Figure 1-3
NOTE: *1): Bottom margin can be set up to 3mm at minimum when the paper
length is designated with “ESC(S” command.) However, the printing
quality is not guaranteed in the area ranging from 3mm to 14mm, from
the form lower end. When the paper length is not designated, the bottom
margin must be wider than 14 mm.
*2): Bottom margin for color printing can be set up 3mm at minimum
when the paper length is designated with “ESC(S” command.). However,
guaranteed print area of color printing is narrow than BK
(monochrome)printing. This is due to the each color nozzles is assigned
in the one row nozzles.
Figure 1-3. Printable Area
Table 1-3. Printable Area for Cut Sheet
Paper Size
Paper
Width
Paper
Length
LM/RM/
TM
BK Bottom
Margin(*1)
Color Bottom
Margin
(*1,*2)
A4 210mm 297mm 3mm
14 mm or more
than 3 mm
21mm or more
than 3mm
Letter 216mm 279mm 3mm
14 mm or more
than 3 mm
21mm or more
than 3mm
B5 182mm 257mm 3mm
14 mm or more
than 3 mm
21mm or more
than 3mm
Legal 216mm 356mm 3mm
14 mm or more
than 3 mm
21mm or more
than 3mm
Statement 139.7mm 215.9mm 3mm
14 mm or more
than 3 mm
21mm or more
than 3mm
Executive 190.5mm 254mm 3mm
14 mm or more
than 3 mm
21mm or more
than 3mm
LM
RM
PL
TM
BM
Printable area
pri
n
tre