User`s guide

Printing on Special Media
3-28
6. At the end of the Paper Size list, choose
User Defined. The
following dialog box appears:
Type in your paper’s width in the Paper Width field
and a length up to
44 inches for the Paper Height. (This
works for banners in either landscape or portrait
orientation.) Click
OK. Go to step 7.
7. Choose
Portrait or Landscape if you haven’t already
specified the orientation in your application software. Set
the printable area if necessary.
8. Click the
Main tab to return to the Main printer settings
dialog box.
9. Choose the
Media Type setting that matches your banner
paper or canvas cloth as described in the table on page 3-4.
(For continuous computer paper, choose
Plain Paper.)
Check the rest of the printer software settings as described
in Chapters 1 and 2. Then click
OK.
10. Click
Close, OK, or Print to print your banner. (You may
need to click a series of these buttons, depending on your
software.)
For banner printing, type
any size up to 44 inches
Note:
With Windows NT, the
User Defined Paper Size
dialog box includes
settings for units of
measure, naming of the
paper size (up to 16
characters), and saving of
multiple user defined
paper sizes. For
instructions on using
these settings, click the
Help button at the bottom
of the Paper dialog box.
Loire-PLUS.BK.book Page 28 Friday, May 2, 2003 2:56 PM