User`s guide

Basic Printing
1-15
Buttons
Operate P
Turns the printer on and off.
LF/FF
Feeds paper line by line. Loads a single sheet or advances
continuous or banner paper to the next top-of-form position
if held down.
Load/Eject
When paper is not loaded, loads a sheet of paper or a single
sheet of continuous paper.
When paper is loaded, ejects a sheet of paper. Feeds
continuous (tractor-fed) paper backward to the paper-park
position. Ejects banner paper backward. Feeds continuous or
banner paper to the tear-off position when pressed after
printing and Auto tear-off mode is set to off in default-setting
mode.
Pause/Reset
Stops printing temporarily. Resumes printing when pressed
again.
Clears the printer buffer if pressed for five seconds.
Micro Adjust D
Micro Adjust U
Adjusts the loading position or tear-off position for
continuous paper. Press the
Micro Adjust D button to feed
paper forward or press
Micro Adjust U to feed paper
backward.
Micro Adjust settings are saved in the printer’s memory. See
“Using the Micro Adjust Buttons” on page 3-20 for details
on adjusting the loading position or tear-off position.
Cleaning B
Starts the black print head cleaning cycle if pressed for
three seconds. See “Cleaning the Print Heads” on page 5-1.
Cleaning A
Starts the color print head cleaning cycle if pressed for
three seconds. See “Cleaning the Print Heads” on page 5-1.
Media Type
Determines whether the Media Type setting you selected in
the printer driver matches the type of media loaded in the
printer.
Note:
The Media Type setting only works when
printing from the paper tray.
Loire-PLUS.BK.book Page 15 Friday, May 2, 2003 2:56 PM