User`s guide

Specifications
B-9
3. While holding down the
Media Type button, press the
Operate button to turn on the printer to enter
default-setting mode. Hold down both buttons for three
seconds, then release them.
The printer loads a sheet of paper and prints an instruction
sheet telling you how to select a language (the default
setting is English).
4. If you want to print the default-setting instructions in
another language, press the
Micro Adjust U button until
the
Ink Out B Yellow and Ink Out B Magenta lights on
your control panel indicate the language you want to use.
5. Press the
Pause button. The printer prints instructions on
changing the default settings.
6. Follow the instructions on the sheet to change the necessary
settings, as listed in the next section. Your changes remain
in effect until you change them again. (To exit without
changing any settings, press the
Pause button.)
7. When you’re finished changing settings, press
Load/Eject
if you need to eject any loaded paper. Then turn off the
printer to exit default-setting mode.
8. Wait five seconds, then turn on your printer to resume
printing.
Language Lights
English Both lights off
French Ink Out
B Yellow on and Ink Out B Magenta off
German Ink Out B Yellow flashing and
Ink Out B Magenta off
Italian Ink Out B Yellow off and Ink Out B Magenta on
Spanish Both lights on
Portuguese Ink
Out B Yellow flashing and
Ink
Out B Magenta on
Loire-PLUS.BK.book Page 9 Friday, May 2, 2003 2:56 PM