User`s guide

Maintenance and Transportation
5-8
Using the Control Panel
1. Load several sheets of paper at least 8.3 inches (210 mm)
wide in the paper tray.
2. Move the paper-release lever backward to the single sheet
position.
3. Turn off your printer.
4. Hold down the
Pause button and turn on the printer to
turn on print head alignment mode. Be sure to hold down
both buttons for three seconds before releasing them.
The printer loads a sheet of paper and prints an instruction
sheet telling you how to select a language (the default
setting is English). The printer can then print instructions
on aligning the print heads in the language you choose.
5. Press the
Micro Adjust U button until the Ink Out B
Yellow and Ink Out B Magenta lights on your control
panel indicate the language you want to use.
Language Lights
English Both lights off
French Ink Out
B Yellow on and Ink Out B Magenta off
German Ink
Out B Yellow flashing and
Ink
Out B Magenta off
Italian Ink
Out B Yellow off and Ink Out B Magenta on
Spanish Both lights on
Portuguese Ink
Out B Yellow flashing and
Ink
Out B Magenta on
Loire-PLUS.BK.book Page 8 Friday, May 2, 2003 2:56 PM