Service manual

Appendix
Rev. A
A-
3
Table A-2. EEPROM Address (continued)
Address Data Value Factory
Default
20H CR Motor initial phase *1
21H (Reserved) ----- -----
22 - 23H YMC Accumulated time 00H
24 - 25H Counter D 00H
26 - 27H Counter E
(Initial charge flag)
00H: Initial charge required
01H: Initial charge done
00H
28 - 29H Counter R
(Cap flushing counter)
00H
2A - 2BH Ink status 00H
2C -
2DH
Counter A
(Protect counter)
00H
2E - 2FH Counter C
(Number of power ON)
00H
30 - 35H Fire dot counter K
(Black )
1 count = 1ng 00H
36 - 3BH Fired dot counter Y
(Yellow)
1 count = 1ng 00H
3C - 41H Fired dot counter M
(Magenta)
1 count = 1ng 00H
42 - 47H Fired dot counter C
(Cyan)
1 count = 1ng 00H
48 - 6BH (Reserved) ----- 00H
6C -6FH Head vacuuming time A 0 to FFFFFFFFH (unit: 10 min.)
Start from 1992/01/01 00:00
01H
00H
00H
00H
70 - 73H 4-color head
uninstallation time
0 to FFFFFFFFH (unit: 10 min.)
Start from 1992/01/01 00:00
00H
*2
74 - 77H (Reserved) ----- 00H
78 - 7BH Power off time 0 to FFFFFFFFH (unit: 10 min.)
Start from 1992/01/01 00:00
00H
*2
7CH (Reserved) ----- -----
7DH VH adjust value (KR) (10000 x KR) -----
7EH VH adjust value (Vad-L) (1000 x VerrAD(L)) -----
7FH VH adjust value (Vad-H) (1000 x VerrAD(H)) -----