Service manual

Chapter 1 Product Descriptions
Rev. A
1-
3
1.2.2 Software Specifications
Printer Language: Exclusive control codes for EPSON Stylus Color 300
EPSON Remote Command
Control Code: <Character mode>
General operation: Initialize printer ESC @
Paper feeding: Form feed FF
Line feed LF
Carriage operation Carriage return CR
EEPROM Control ESC |
<Graphics mode>
General operation: Initialize printer ESC @
Uni-directional printing ESC U
CSF Mode control ESC EM
Paper feeding: Form feed FF
Line feed LF
Line spacing ESC +
Carriage operation: Carriage return CR
Page formatting: Page length ESC (C
Top/Bottom margin ESC (c
Print position control: Horizontal print position ESC $, ESC ¥
Vertical print position ESC (V, ESC (v
Spacing: Define unit ESC (U
Graphics: Graphics mode ESC (G
Raster graphics ESC . (∗1)
Color control: Printing color ESC r (∗2)
Note) EPSON Stylus Color 300 requires the specific printer driver for proper printing
operation and control, and use of other printer driver could result in improper
printing.
∗
1: Works only with unique parameters.
∗
2: It works only as a print buffer select command.