Specifications

EPSON Stylus COLOR 200
Ink Jet Printers 6/96 EPSON Stylus COLOR 200-11
3. Slide the left edge guide against the left edge of the paper;
then push up the lock lever to secure its position.
4. Remove the paper, fan the stack, and tap the edges against
a flat surface to even them up.
5. Reload the paper straight down into the printer as shown.
Then rest it against the paper support.
Loading Special Papers and Other Media
When using special coated paper, glossy paper, envelopes, and
transparencies, keep the following in mind:
Use special coated paper for 720 dpi or high-quality glossy
paper only with the color print head unit; do not use them
with the monochrome print head.
Do not touch the printable surface of the paper; hold the
sheets by their edges. The moisture and oils on your hands
can reduce print quality.
Use special coated paper within one year of purchase. Use
glossy papers and transparencies within six months.
You can print on sheets of labels in your printer. Be sure that
your paper thickness lever is set to the thick paper position,
and that the thickness adjustment lever is set to the + position.
When printing on high-quality glossy paper or
transparencies, remove each sheet from the output tray
immediately after it is printed. Make sure each sheet is dry
before stacking.
Return unused sheets and envelopes to their original
package as soon as possible after you finish printing.
Unfavorable storage conditions—especially high
temperature, humidity, and direct sunlight—can damage the
media.
Follow any other special loading procedures included in the
following sections.
Loading Special Papers and Transparencies
You can load up to the following number of sheets in the sheet
feeder:
70 sheets of special coated paper. If you load legal-size special
coated paper for 720 dpi, do not load it more than halfway to
the arrow mark on the left edge guide of the sheet feeder.
30 sheets of EPSON high-quality glossy paper with a sheet of
plain paper beneath the last sheet in the stack. To avoid
printing on the plain paper, print your document one page
at a time. If you load a single sheet of glossy paper, place a
sheet of plain paper beneath it and print one page at a time.
Note:
If you load multiple sheets of glossy paper, the minimum top
margin is 1.2 inches (30 mm). To print with a smaller top margin,
load and print glossy paper one sheet at a time.
50 sheets of transparency film, printed one at a time, with one
sheet of plain paper beneath the last transparency in the
stack.
Follow these steps to load special paper or transparency film:
1. Push down the left edge guide lock lever; then slide the left
edge guide to the left as far as it will go.
2. Fan a stack of paper or transparencies; then tap it on a flat
surface to even the edges.