Specifications

30
Installing Software and Configuring the Print Server
13. If the test page prints, click
OK
to close the Properties window.
If it fails to print, try the following:
■
Make sure that the printer and print server are connected and that both
are on.
■
Check WP-Admin to make sure you have a signal (see page 22).
■
Make sure you’ve entered the correct IP address in step 8.
■
Make sure you clicked
Apply
in step 11.
Now you’re ready to start printing. For instructions, see Printer Basics.
Setting Up a Network Port on Windows 2000
Before you begin, run WP-Admin and note the IP address of your print server. Then
follow these steps to set up a network port on a computer running Windows 2000:
1. From the Start menu, click
Settings
>
Printers
.
2. Right-click the
EPSON Stylus C80 Series
printer icon, then click
Properties
.
3. On the Port tab, click
Add Port
. You see
this window:
4. Select
Standard TCP/IP Port
and click
New Port
. You see the Add Standard
TCP/IP Port wizard.
5. Click
Next
.
6. In the
Printer Name or IP Address
box, enter the print server’s IP
address and click
Next
.
7. Follow the instructions on the screen
to complete the wizard.
8. Click
Close
to close the Printer Ports
window.
9. On the Properties window, click
Apply
.