Installation guide

Installing the Print Server Software
21
Installing and Starting EpsonNet WebManager
Before you install EpsonNet WebManager, make sure TCP/IP is installed, and the IP
address or host name for the computer is set. Register the host name in the
HOSTS
file
on the computer.
Follow these steps to install EpsonNet WebManager:
1. Insert the Printer Software CD-ROM in your drive. You see the Installation
Program window.
2. Double-click
Install EpsonNet WebManager
, then follow the instructions on the
screen to install the program.
You can also install the program by running SETUP.EXE in the
ENWEBM\Disk1 folder on the CD-ROM.
Make sure that anyone who needs to use EpsonNet WebManager knows the IP
address or host name of the server.
3. To open EpsonNet WebManager from the server computer where it is installed,
click
Start
, point to
Programs
, point to
EpsonNet WebManager
, and then click
EpsonNet WebManager
.
To open EpsonNet WebManager from a client computer, open a browser and
enter the IP address (or host name) of the server and port number (8090), as
follows:
http://the IP address or host name of the server:8090/
for example:
http://192.168.100.201:8090/