Installation guide

7
Setting Up Your Printer
This chapter describes how to unpack and set up your printer, and how to connect it
to your network. For more information on using and maintaining the printer, see the
EPSON Stylus C80 Reference Guide as described on page 3.
Unpacking the Printer
Remove any packing material from the printer as described on the unpacking sheet in
the printer box. Then make sure you have the following items:
Printer Software
CD-ROM
paper support
You’ll also need a Category 5 twisted pair network cable with
RJ45 connectors to connect the printer to a hub or switch. If
you’ll be connecting a computer directly to the printer (without a
hub or switch), you’ll need a “crossover” network cable.
AC adapter and power
cord for print server
printer
power cord
print server
ink
cartridges
Getting Started
(this book)
Printer
Basics