Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
A
SR-600
Specification
(STANDARD)
2 1
1. APPLICATION
This product specification applies to the SR-600 POS terminal system.
2. GENERAL DESCRIPTIONS
2.1 Features
The IM-600 is a base unit of the SR terminal. Designed for use in hospitality, and other high-end
establishments, it provides the following features;
• IBM
®
PC/AT
®
compatible
• Intel
®
Celeron
TM
(PPGA package: up to 366 MHz, FCPGA package: up to 733 MHz) can be used.
• Two 168-pin DIMM sockets are ready for a maximum 512MB of memory.
• 2 MB video memory installed with the video controller in the PCI bus.
• TFT 12.1-inch color liquid crystal display.
• Two disk spaces are available for 2.5-inch hard disk drive, CD-ROM drive or CompactFlash
TM
card.
• An Ethernet controller for 10BASE-T/100BASE-TX is installed in the PCI bus.
• One PCI expansion slot (PCI version 2.1 compliant.)
• Cash Drawer/CRT interface board available as a factory option.
• A customer display can be installed as an user option.
• Case lock prevents unauthorized access to the inside of the terminal.
• Display angle adjustable from 20 to 65 degrees.
• Maximum dimensions are 310 (W) × 363 (D) × 277 (H) mm (including rubber feet, excluding LCD
clamp.)
• A high resolution display of 800x600 dots, using 12.1-inch color TFT LCD.
• A high-luminance backlight with 350 cd/m
2
(except for touch panel).
• Input by finger using the resistive film type of the touch panel.
• Water-resistant surface on the touch panel, equivalent to JIS waterproof class I.
• MSR units (DM-MS123) connection.
2.2 Accessories
• User’s manual
• Front lock key
• DM holder
• DM cover
NOTE: A power cable is not supplied with the SR-600.
2.3 Related Documents
Refer to the document related to specific options for their specifications.
• DM-MS123 specification