Specifications

Confidential

EPSON

TITLE

SHEET

REVISION

NO.

SHEET

SR-600

Specification

(STANDARD)

14 13

4.4.4 PCI Board

This board provides the PCI interface. It connects via its own connector directly near the rear of the

motherboard.

4.4.5 VR Board

This board consists of the Power and Reset switches, speaker volume control and keyboard/mouse

interface.

4.4.6 Drawer Board (Option)

This optional board may be installed to provide ports for two cash drawers and a CRT.

This is a factory option which is installed in the SR-600.

4.5 Miscellaneous

4.5.1 CPU

The CPU and its cooling fan are installed in a 370-pin socket on the motherboard.

4.5.2 DIMM

Two DIMM slots are provided, supporting up to two 32, 64, 128 or 256-MB DIMMs for up to 512 MB of

RAM capacity. The cabinet cover must be removed to access the DIMMs.

4.5.3 Hard Disk Drive

A 2.5-inch hard disk drive is normally installed. Access requires opening the case. The hard drive is

affixed with one screw.

4.5.4 PCI Slot

The PCI slot is located beneath the power supply on the bottom of the chassis. The maximum

dimension of installable PCI card is 170 mm × 105 mm. A PCI card can be installed or removed by

removing the cabinet cover and the bottom frame.

Or the PCI card which is smaller than 145 mm × 105 mm can be installed or removed from the access

slot exposed by just removing the PCI slot cover instead of removing the bottom frame. A card which is

longer than 145mm might be installed if it’s width is less than 105mm.

Max. 105(105) mm

Max. 170(145)mm

[Units: mm]

( ) : Dimensions of PCI slot which can be installed or removed from the access slot of the IM-600.

Figure 4.5.1 Dimensions of Installable PCI Cards