Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
A
SR-600
Specification
(STANDARD)
11 10
4.2 Terminal Rear Panel (IM-600)
I/O Interface
PCI Slot
Customer Display I/F
Power Connector
O |
Power Supply
Fan
Main Power Switch
Figure 4.2 Terminal Rear Panel
4.2.1 Main Power Switch
Power to the primary side of the power supply is applied through this switch. Power is turned off when
the rear cover is removed, so this switch is normally kept in the ON position. The switch is not
accessible externally, to prevent power being turned off inadvertently.
4.2.2 Power Connector
This connector accepts external AC power using a type-L AC cable. The rear cover must be removed
to access the connector.
4.2.3 Customer Display Connector
The customer display connects here. The rear cover must be removed to access the connector.
CAUTION: Customer display unit can be attached and removed only with the power turned off.
Please do not connect non-customer display devices such as network cable. The network device may
be damaged.
4.2.4 Power Supply Fan
This fan is on the back of the power supply.
To avoid damage, do not allow the fan outlet to be obstructed.