Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
A
SR-600
Specification
(STANDARD)
10 9
4. BASE UNIT STRUCTURE
4.1 Terminal Front Panel (IM-600)
CD-ROM LED
Front Power Switch
Reset Switch
Floppy Disk Drive Connector
Speaker Volume Control
KB/Mouse
CD-ROM Eject Button
Front Cover Lock
Figure 4.1 Front Panel Controls & Connectors
4.1.1 Front Power Switch
This pushbutton switch at the lower left switches between power on and off. The switch is covered to
prevent inadvertent operation.
NOTE: Some operating systems might shut the power down automatically when the operating system
shuts off.
4.1.2 Reset Switch
Like the Power switch, this switch is behind a cover at lower left side of the front panel. This switch
resets the entire system. A pointed implement is required to press the switch.
4.1.3 Speaker Volume Control
Like the Power and Reset switches, the speaker volume control at the lower left of the front panel is
also covered. Turning it to the right increases volume.
4.1.4 Front Cover Lock
This lock secures the large cover at the front right side of the terminal. Locking this cover secures the
CD-ROM or CompactFlash from theft.
This lock operates in conjunction with the terminal cover lock, so that when the front cover is locked,
the terminal cover is also locked. The terminal cover locks in such a way that it cannot be opened with
a screwdriver, thus also securing the hard drive and other internal components from theft.
4.1.5 Floppy Disk Drive Connector
An external 3.5-inch floppy disk drive can be connected here.
Power should be turned off before connecting or disconnecting the drive.
4.1.6 Keyboard/mouse
A PS/2 compatible keyboard/mouse interface is provided.
Use a Y cable when the keyboard and mouse are used simultaneously.