Specifications

REV.-A
3.2.1 Housing Removal
This paragraph describes the procedures for removing the HOUSINGS, FRONT and UPPER.
[Step 1]
[Step 2]
[Step 3]
[Step 4]
[Step 5]
(
Remove the SHEET GUIDE ASSY., REAR, the COVER, PRINTER, the COVER, FRONT, the SHEET
GUIDE
ASSY., FRONT, the tractor, and the knob.
Unscrew
C.B. B. screw (M3 X 12) attaching COVER, GEAR to the HOUSING, UPPER, to remove
the COVER, GEAR.
Unscrew
C.B. screw (M4 X 16) attaching the HOUSING, UPPER and C.B.B. screw (M3 X 12)
attaching the HOUSING, FRONT to the HOUSING, UPPER.
C.B.B. Screw (M3 X 12)
I
C.B. Screw (M4 X 16)
\ /
C.B.B. Screw (M3
x 12)
UPPER
Figure 3-6. Housing Removal (1)
Remove 3 pawls attaching the HOUSING, FRONT to the HOUSING, UPPER.
~80-column printer: 2 pawls)
Pull the HOUSING, FRONT toward you, and disconnect 2 connectors on the control panel to
remove the HOUSING, FRONT.
HOUS
Figure 3-7. Housing Removal (2)
3-11