Specifications

REV.-A
(8) PITCH Button
Pushing this switch once selects the character pitch. And holding this button down selects the following
ones in sequence. PITCH indicators indicate the currently selected character pitch.
(9) RESET Button
Holding this button down more than 0.45 second, the input data buffer is cleared and the printer
initialized by software as ESC
Cl?.
(10) CLEANING Button
Holding this button down more than 0.5 second, the print head cleaning is performed. This button is
only effective in the PAUSE condition. The CLEANING button is located inside the DIP switch cover.
INDICATORS
(1) POWER (green)
Lit
when the printer’s power switch is on, and AC power is supplied.
(2) PAUSE (orange)
Lit when the printer is in PAUSE mode (no printing, no paper feed, or no data accepting).
(3) DATA (orange)
Lit when the printer has received data from the host machine.
(4) PAPER-OUT (red)
Lit when the paper-out detector detects no paper. Refer to Section 1.6.3, Paper-out Detection and Forms
Override Function.
(5) INK END (red)
Lit when the printer detects the ink empty condition.
(6) MICRO FEED (orange)
Lit when the micro feed function is enabled.
(7) TEAR-OFF (orange)
Lit when the sheet is advanced to the tear-off position.
(8) BIN 1 (green)
Lit when bin 1 is selected.
(9) BIN 2 (green)
Lit when bin 2 is selected.
(1 O) FONT (green) --Draft, Courier, Roman, Saris Serif, Prestige, Script, Script C, Orator, Orator-S
These indicators show the currently selected font.
(1 1) PITCH (green) --10
CPI, 12 CPI, 15 CPI, 17 CPI, 20 CPI, PS
These indicators show the currently selected pitch.
1-17