Specifications

REV.-A

1.4

CONTROL PANEL

On the control

panel are: 10 non-lock type buttons, and 24 indicators.

——

Lom

-!.

111—

Figure 1-10. Control Panel

BUTTONS

(1) PAUSE Button

This button controls printer action. Pressing the button toggles the printer between PAUSE condition

(no printing, no paper feeding, or no data

acception) and RUNNING.

(2) FORM FEED Button

Advances the paper to the next top of from position. This switch is also used for the micro feed function.

(3) LINE FEED Button

Advances the paper by one line ( 1/6

inch)By pressing this switch more than 0.5 second, the paper is

fed continuously until releasing this switch. This switch is also used for the micro feed function.

(4) LOAD/EJECT Button

Pushing this switch loads the paper when paper-out condition is detectedAnd ejects the paper when

out of paper condition is not detected as in the Forms Override function.

(5) TEAR-OFF/BIN l/BIN 2 Button

tractor-feed mode, pressing this button advances continuous paper to the tear-off position, and the

TEAR-OFF indicator is

Iitln friction-feed mode, pressing this button toggles between bin 1 and bin 2,

and the selected BIN indicator is lit.

c“

.’)

(6) MICRO FEED Button

Selects or cancels the micro feed function. When this function is enabled, the MICRO FEED indicator

is lit. In the micro feed mode, the LINE FEED button is used to feed the paper forward, and the FORM

FEED button is used to feed the paper backward.

Paper feed performed by this micro feed function does not affect the page position control. And this

func!ion is also used to adjust the paper loading position and to adjust the continuous paper to meet

the tear off edge.

(7) FONT Button

Pressing this button selects a font, and pressing it continuously selects the following ones in sequence.

The

‘ONT

LED indicates the currently selected font.

1-16