Specifications

REV.-A
Table 1-10. Character Matrix and Character Size
,
Printing Mode
Face Matrix
HOD Character Size
Unit ESC sp
*
; Draft, 10 pitch 15 x 44
180 2.1 x 3.1 120
Draft, 12 pitch
13 x 44
180
1.s X 3.1
120
Draft, 15 pitch 11 X 32
180
1.6 X 2.3
120
Draft, 17 pitch 15 x 44
360
1.1 x 3.1
120
Draft, 20 pitch 13 x 44
360
0.9 x 3.1
120
LQ, 10 pitch
31 x 22
360
2.2 x
3.1 180
LQ, 12 pitch 27 X 22
360
1.9 x 3.1 180
LQ, 15 pitch 22 X 16
360 1.6 X 2.3
180
LQ, 17 pitch 16 X 44
360
1.1 x 3.1
180
LQ, 20 pitch
14 x 44
360
1.0 x 3.1
180
LQ, proportional Max. 37 X 44
360
2.6 X 3.1 180
Min. 18 X 44
360
1.() x 3.1
LQ, proportional,
Max. 28 X 32
360
1.8 X 2.3 180
@
super/subscript Min. 12 X 32
360
0.7 X 2.3
NOTES: ● HDD is horizontal dot density in dots per inch.
● Face matrix and character size indicate the maximum size of a character. This value is
dependent on paper, etc.
● Unit ESC sp (which also can be sent as unit, followed by the character string CHR$(&h20)),
indicates the minimum length to be added to the right of the character specified in the ESC
SP control code.
@
..; ,
1-12