Specifications

REV.-A
3.2.7.11 Disassembly of FRAME ASSY., RIGHT
[Step 1]
[Step 2]
[Step 3]
[Step 4]
[Step 5]
[Step 6]
[Step 7]
[Step 8]
[Step 9]
[Step 10]
[Step 1 1]
[Step 12]
[Step 13]
Remove the housing. (Refer to section 3.2. 1.)
Remove the printer mechanism. (Refer to section 3.2.4.)
Remove the CAP
ASSY.. (Refer to section 3.2.7.2.)
Remove the FRAME, FRONT. (Refer to section 3.2.7.4.)
Remove the STEPPING MOTOR, PF. (Refer to section 3.2.7.7.)
Remove the PAPER HOLDING
ASSY.. (Refer to section 3.2.7. 1.)
Remove the PLATEN
ASSY.. (Refer to section 3.2.7.9.)
Unscrew
C.C. screw (M3 X 8) which fastens the FRAME, SUB, RIGHT, and remove the FRAME,
SUB, RIGHT.
Remove
the release lever from the FRAME ASSY., RIGHT.
Remove the INTERMITTENT GEAR and the SPUR GEAR (27) from the FRAME
ASSY., RIGHT.
Remove the COMBINATION GEAR (8, 30) from the shaft (C) on the FRAME
ASSY., RIGHT.
Remove the COMPRESSION SPRING (200), the PLAIN WASHER (10.3 X 0.5 X 18.7), and
the SPUR GEAR (34.5) from the shaft (B) on the FRAME
ASSY., RIGHT.
Remove the COMPRESSION SPRING (200), the PLAIN WASHER (8 X 0.5 X 15), and the SPUR
GEAR (34.5) from the shaft (A) on the FRAME
ASSY., RIGHT.
Shaft (C)
)
B, RIGHT
c
B)
Figure 3-36. Disassembly of Frame Assembly, RIGHT
3-33