Specifications

REV.-A
I
REQUIRED ADJUSTMENT ITEMS
If you have reassembled the carriage, make the following adjustment in the specified sequence.
(1) Timing belt tension adjustment (Refer to section 4.3.)
(2) Platen gap adjustment (Refer to section 4. 1.)
(3) Platen gap adjustment (Refer to section 4.2.)
(4) Printhead slant adjustment (Refer to section 4.5.1)
(5) Print position adjustment (Refer to section 4.5.2)
C2
.!. ‘.; !
,.
c..
-\
,..
.“
3-30