Specifications

REV.-A
[Step 12] Rotate the HOLDER, PLATEN, RIGHT and HOLDER, PLATEN, LEFT which fasten the PLATEN
ASSY. to the frame, LEFT/RIGHT, and remove the PLATEN ASSY..
HOLDER, PLATEN, LEFT/RIGHT
Figure 3-31. Disassembly of PLATEN ASSY. (2)
ASSEMBLY POINTS
When assembling the GUIDE, PAPER EJECT be sure to hook the TORSION SPRING 700 to the
GUIDE PAPER EJECT.
When attaching the SENSOR SUB
ASSY., PW make sure the adhesive double coated tape is
completely covered by
FPC.
Before setting the platen, set up
the other parts as shown in the figure below.
Take the alignment of the HOLDER, PLATEN, RIGHT and HOLDER, PLATEN, LEFT.
Figure 3-32. Aligning HOLDER, PLATEN
3-29