Specifications

REV.-A
3.2.7.9 Disassembly of PLATEN ASSY.
[Step 1] Remove the housing. (Refer to section 3.2.1.)
[Step 2] Remove the printer mechanism. (Refer to section 3.2.4.)
[Step 3] Remove the CAP
ASSY.. (Refer to section 3.2.7.2.)
[Step 4] Remove the FRAME, FRONT. (Refer to section 3.2.7.4.)
[Step 5] Remove the PAPER HOLDING
ASSY.. (Refer to section 3.2.7.1.)
[Step6] Unscrew the2screws (C. B. S.screw(M3X 8))which fasten the COVER, PLATEN tothe frame,
LEFT/RIGHT, and remove the COVER, PLATEN.
[Step 7] Remove the E-ring (3) which fixes the GUIDE, PAPER EJECT to the left frame and remove the
GUIDE, PAPER EJECT.
[Step 8] Unscrew the 2 screws
(C.B.B. screw (M3X6)) which fasten the PAPER GUIDE ASSY.,
SUPPORT to the frame, LEFT/RIGHT, and remove the PAPER ASSY., SUPPORT.
[Step 9] Remove the PUMP
ASSY. and the CLEANER ASSY.. (Refer to section 3.2.7.3.)
[Step 10] Unscrew
C.B. screw (M2X4) which fastens the SENSOR SUB ASSY., PW to the TOP EDGE
HOLDER., and remove the SENSOR SUB
ASSY., PW while separating the FPC (connected
to the sensor) from the adhesive double coated tape.
[Step 11] Hook off the GROUNDING SPRING.
PAPER GUIDE ASSY.,
C.B.B Screws (M3 x 6)
SUPPORT
\~
TOP
HOL
ASS
ing (3)
1
\
,-
C.B.S. Screws
(M3x 8)
w
@
+
:
Figure 3-30. Disassembly of PLATEN ASSY. (1)
3-28