Specifications

REV.-A
3.2.7.7 STEPPING MOTOR, PF Removal
[Step 1] Remove the housing. (Refer to section 3.2. 1.)
[Step2] Remove the printer mechanism. (Refer to section 3.2.3)
[Step 3] Unscrew the CUP screw
(M3X8) and the C.B.S. screw (M3X8) which fasten the STEPPING
MOTOR, PF to the FRAME, SUB, RIGHT, and remove the STEPPING MOTOR, PF.
STEPPING MOTOR, PF
‘d
\
CUP Screw
d
A., ‘~ , ~ ,
>.;
GHT
“\
P
f
(M3x8)
C.B.S. Screw (M3 X 8)
Figure 3-28. STEPPING MOTOR, PF Removal
3.2.7.8 STEPPING MOTOR, TOP EDGE HOLDER Removal
[Step 1] Remove the housing. (Refer to section 3.2.1.)
[Step 2] Remove the printer mechanism. (Refer to section 3.2.4.)
[Step 3] Unscrew the 2 screws
(C.B.S. screw (M3X8)) which fasten the STEPPING MOTOR, TOP EDGE
to the right frame and remove the STEPPING MOTOR, TOP EDGE HOLDER.
TOP EDGE
C.B.S. Screws (M3x8)
Figure 3-29. STEPPING MOTOR, TOP EDGE HOLDER Removal
3-27